|
why softer face is rotary
|
|
Source：Internet Author：Unknow Pubdate：2008-11-03
|
|
santoshdada (Mechanical)
17 Oct 08 3:16
in a mechanical seal why a softer face is rotary
thx in advance
bk19702 (Mechanical)
17 Oct 08 15:59
The softer face is not always the rotating face, but is almost always the spring loaded face. The softer face being the sprung member allows it to 'wear into' a harder surface, i.e. the harder stationary or non spring loaded face. In the optimum tribological scenario, we want two dissimilar materials with differing finishes and hardnesses so we maximize lubricity and upper PV limit capability.
Soft is a relative term, as even with hard seal face pairings there will be a hardness difference between the two. The exception is when you run like hard face materials against on another, which is not a common practice due to the huge drop off in PV limit capability.
字串8
sreid (Electrical)
18 Oct 08 22:05
Mostly, the soft seal is replaceable and the hard shaft is not. It's kind of a "No-Brainer" choice.
santoshdada (Mechanical)
20 Oct 08 3:08
Dear sreid
if replacement is concept behind this then softer face should be stationary as it is easy and economical to replace then spring loaded face
i am quite agree with bk19702
thx
santoshdada (Mechanical)
20 Oct 08 3:09
Dear sreid
if replacement is concept behind this then softer face should be stationary or non spring as it is easy and economical to replace then spring loaded face
i am quite agree with bk19702
thx
sreid (Electrical)
20 Oct 08 6:35
字串1
I answered too fast once again and didn't read the post correctly. My "Vision" was a "rubber" shaft seal. The shaft is hard and rotating and the seal is stationary and easily replaced. It wears and the "Hardened" shaft does not.
So in the OP, what does "Mechanical Seal" mean exactly.
bk19702 (Mechanical)
20 Oct 08 8:01
Probabaly worth while to read and understand the post fully before responding. Mechanical seal as stated in the OP (at least how I comprehended it, anyway) should be referring to contacting end-face seals and any variation of them.
（Click：）
|
| Previous：Spiral Wound - centering rings Next：tank floating roof seal |
|
[ Add TO Favorites]
[TOP] [PRINT]
[CLOCE WINDOWS] |
|
|
|
